IGL Ecoclean Strip – Low-Solvent Coating Prep Spray

IGL Ecoclean Strip is a ready-to-use surface preparation spray designed to remove polishing residue, oils, grease, wax and other contamination before applying a ceramic coating.

Its low-solvent formula is specifically designed for use on both hard and sensitive paint finishes, helping prepare the surface without relying on the aggressive solvent levels commonly found in traditional panel wipes.

Strip leaves the surface clean and residue-free, allowing you to inspect the true condition of the paint and create a properly prepared surface before coating application.

KEY BENEFITS

• Removes polishing oils and compound residue

• Removes wax, grease and silicones

• Prepares surfaces before ceramic coating application

• Low-solvent formula

• Suitable for soft and delicate paint finishes

• Helps maintain the integrity of sensitive clear coats during preparation

• Leaves the surface clean and residue-free

• Ready to use – no dilution required

• Suitable for professional and enthusiast detailing

• Made with biodegradable ingredients

BEST USED FOR

Ideal as the final cleaning and preparation step after polishing and before applying a ceramic coating.

Strip removes residual polishing oils, waxes, grease and other contamination that can remain on the surface after paint correction.

It can also be used when inspecting paint after polishing, allowing you to remove polishing oils that may temporarily mask defects or affect the appearance of the finish.

AREA OF APPLICATION

IGL lists Ecoclean Strip for use on vehicle surfaces, including both soft and hard paint finishes.

It is particularly useful on:

• Automotive Paintwork ✓

• Clear Coat ✓

• Soft & Sensitive Paint ✓

• Hard Paint Finishes ✓

• Piano Black & Delicate Finishes ✓

SURFACE PREPARATION

Ecoclean Strip is ready to use and does not require dilution.

1. Spray IGL Ecoclean Strip evenly onto the surface.

2. Wipe the area using a clean microfibre cloth.

3. Fold or turn the cloth to expose a clean section.

4. Wipe the surface again.

5. Repeat with another clean section of the cloth where required to ensure all residue has been removed.

6. Once the surface is completely clean and residue-free, proceed with the coating application.

Using clean sections of the microfibre towel is important to avoid simply redistributing polishing oils and contamination across the surface.

RECOMMENDED COATING PREPARATION PROCESS

1. Wash & Decontaminate
Thoroughly wash the vehicle and remove bonded contamination using products such as IGL Ecoclean Iron where required.

2. Paint Correction
Compound or polish the paint where required to remove defects and improve the finish.

3. Surface Preparation
Use IGL Ecoclean Strip to remove polishing oils, wax, grease and remaining surface residue.

4. Inspect
Check the paint under suitable lighting to ensure the finish is clean and free from remaining polishing residue.

5. Apply Coating
Once the surface is properly prepared, proceed with the chosen ceramic coating according to its application instructions.

What is IGL Ecoclean Strip used for?

Strip is a surface preparation spray used to remove polishing residue, oils, wax, grease and other contamination before applying a ceramic coating.

Do I need to dilute IGL Ecoclean Strip?

No. Ecoclean Strip is supplied ready to use and does not require dilution.

Is IGL Ecoclean Strip safe on soft paint?

Yes. Its low-solvent formulation is specifically designed to be suitable for soft and sensitive paint finishes.

Why use Strip after polishing?

Polishing compounds can leave oils and residue behind on the paint. Strip removes this contamination so the true condition of the finish can be inspected and the surface properly prepared for coating application.

Does IGL Strip help ceramic coatings bond to the paint?

Strip removes surface contamination that can interfere with coating adhesion, leaving a clean surface ready for ceramic coating application.

How is IGL Strip different from a traditional panel wipe?

IGL Strip uses a low-solvent formulation designed to minimise the solvent exposure associated with more aggressive surface-preparation products, making it particularly useful on delicate or easily marked paint finishes.

Can I use IGL Strip before applying products other than IGL coatings?

Its primary purpose is to leave the surface clean and free of oils, waxes and polishing residue before protection is applied. IGL specifically promotes it for its ceramic coating range, while IGL Australia also describes it as suitable for surface preparation before coatings, sealants and waxes.