IGL PlushDry 1400GSM Microfibre Drying Towel

VEHICLE DRYING

1. Thoroughly rinse the vehicle after washing.
2. Place the IGL PlushDry towel flat against the wet surface.
3. Gently drag or glide the towel across the panel, allowing the twist-weave fibres to absorb the water.
4. Work around the vehicle until the surface is dry.
5. Wring out the towel if required before continuing.

Avoid unnecessary pressure when drying. Allow the absorbent fibres of the towel to do the work.

WITH A DRYING AID

PlushDry can also be paired with a suitable drying aid such as IGL Ecoshine Enhancer.

1. Wash and rinse the vehicle.
2. Lightly apply the drying aid to the wet panel as directed.
3. Dry using the PlushDry towel.
4. Buff any remaining product where required with a clean microfibre towel.

This combines the drying stage with the application of additional gloss, slickness and protection.

CARE & MAINTENANCE

To maintain the towel's softness and absorbency:

• Machine wash separately in cold water
• Do not use fabric softener
• Do not use bleach
• Tumble dry on low heat or allow to air dry
• Keep the towel away from dirt, grit and sand
• Store clean and dry between uses

Avoid allowing the towel to contact the ground, as trapped grit or contamination may scratch vehicle surfaces during future use.

What GSM is the IGL PlushDry towel?

The PlushDry uses an ultra-dense 1400GSM twist-weave construction.

How much water can the PlushDry absorb?

IGL states that the PlushDry fabric can absorb up to five times its own weight in water.

Which PlushDry size should I choose?

The Large 100cm × 50cm towel is best suited to full vehicle drying and larger surfaces.

The Compact 40cm × 40cm towel is easier to handle for motorcycles, smaller vehicles, glass and detailed areas.

Is the PlushDry safe on automotive paint?

Yes. IGL designed the towel for use on paint and delicate automotive surfaces. Its soft, lint-free twist weave and edgeless construction are intended to provide safe drying when the towel is clean and used correctly.

Can I use PlushDry on PPF and vinyl wraps?

Yes. IGL Australia lists the towel as suitable for paint, vinyl, PPF, glass and chrome.

Can I machine wash the PlushDry towel?

Yes. IGL recommends washing it separately in cold water without fabric softener or bleach. It can then be tumble dried on low heat or air dried.

Should I use fabric softener when washing a drying towel?

No. IGL specifically advises against fabric softener because it can negatively affect the towel's absorbency.

Can I use PlushDry with a drying aid?

Yes. A drying aid can be used with the towel to provide additional lubrication during drying. Products such as IGL Ecoshine Enhancer can be applied during the drying stage according to their individual application instructions.